Banjo Bolt M10 x 1.25 | 20 MM Grip Length
Includes Crush Washers
Banjo Bolt M10 x 1.25 | 20 MM Grip Length
Includes Crush Washers
Banjo Bolt M10 x 1.25 | 20 MM Grip Length
Includes Crush Washers
Banjo Bolt M10 x 1.25 | 24 MM Grip Length
Includes Crush Washers
Banjo Bolt M10 x 1.25 | 24 MM Grip Length
Includes Crush Washers
Banjo Bolt M10 x 1.25 | 24 MM Grip Length
Includes Crush Washers
Double Banjo Bolt M10 x 1.25 | 30 MM Grip Length
Includes Crush Washers
Double Banjo Bolt M10 x 1.25 | 30 MM Grip Length
Includes Crush Washers
Double Banjo Bolt M10 x 1.25 | 30 MM Grip Length
Includes Crush Washers
Double Banjo Bolt M10 x 1.25 | 39 MM Grip Length
Includes Crush Washers
Double Banjo Bolt M10 x 1.25 | 39 MM Grip Length
Includes Crush Washers
Double Banjo Bolt M10 x 1.25 | 39 MM Grip Length
Includes Crush Washers
Would like to send a huge shout out and thank you to J2Racing for the support and delivering quality products for all of our projects. They’ve inspired us to keep pursuing our passion and to never give up on our goals. They’ve also taught us the importance of giving back to the community and supporting other small businesses. We’re proud to be associated with J2 Racing, and we look forward to continuing their collaboration and friendship
#automotive #c30 #c30dually #build #restoration #supportsmallbusiness #sema2024prep
After drive once over - the colors on the #titanium exhaust and stainless headers 🥶🥵
The materials- stainless_headers 🇺🇸
The dudes that helped me turn those materials into something dv808925 👨🏽🏭and underpressureracing 👨🏭
#tube40 #fabrication #builders #freinds #talented #art #racecar #driftcar #stainlesssteel #tigweld #teamburnthemost
Getting closer. The S13.4 Engine bay is done minus wiring. jdmbooger coming in clutch with getting it all setup and plumbed! Only a little longer before she`s up and running. I can`t wait to start driving again!
#1JZ
#1JZGTE
#ChaseBays
#phenixindustries
#tomei
#bcracing
#cppistons
#radindustries
#vibrant
#defworx
Got to experience some home track love today sonoma_drift had some of our local pros testing today and blessed me with the opportunity to shake down #tube40 . The car felt amazing for having coilovers setup to the spec of my old car (sprung and valved for a car that’s over 1000lbs heavier) - I’ll be sending the coilovers back to stance to have tfdave work his magic. The ron_davis_radiators coolant system worked flawlessly, the car never went over 190 degrees cylinder head temp - oil stayed 190 degrees- I’ve never had a drift car that refused to get hot, until now. I can’t say enough how pleased I am with this car ! Not a single hiccup, the radiumengineering fuel system is quiet and kept the motor fed, the tremecperformance #tkx transmission shifted awesome up at redline (7200rpm) another thing that stood out is how non-clunky the car sounds - no gear noise - no squeaking- nothing but the sound of that 416 🎶😁 - Thank you faruk.kugay for the invite- I didn’t want to drive anywhere else for the first time! Everyone involved in this project I can’t thank you all enough- robertljuba thank you for always supporting these wild ideas. The most important person I wanna thank is my wife mama.tiff.tiff - you allow me to be me and I love you for that ❤️ #drifting #tubechassis #racecar #art #fabrication #s13 #silvia #240sx #bayarea #testdrive #shopsmall 🎥 ybfavworm 📸 trent_musser
