45° Flare to Pipe Elbow -06 | 1/2 NPT
Original price was: $16.44.$4.93Current price is: $4.93.Item# ZB61245-10
45° Flare to Pipe Elbow -06 | 1/4 NPT
Original price was: $8.62.$2.59Current price is: $2.59.Item# ZB61445-10
45° Flare to Pipe Elbow -06 | 1/8 NPT
Original price was: $8.64.$2.59Current price is: $2.59.Item# ZB61845-10
45° Flare to Pipe Elbow -06 | 3/8 NPT
Original price was: $10.42.$3.13Current price is: $3.13.Item# ZB63845-10
90° Flare to Pipe Elbow -06 | 1/8 NPT
Original price was: $9.42.$2.83Current price is: $2.83.Item# ZB61890-10
90° Flare Union -06
Original price was: $9.46.$2.84Current price is: $2.84.Item# ZA690-10
AN Flare to Female Swivel On Branch TEE -06
Original price was: $15.34.$4.60Current price is: $4.60.Item# ZC0643-10
AN Flare to Female Swivel On Run TEE -06
Original price was: $15.34.$4.60Current price is: $4.60.Item# ZC0644-10
AN to Metric Fitting -06 | M10 x 1.25
Original price was: $5.87.$1.76Current price is: $1.76.Item# ZA6139-10
AN to Metric Fitting -06 | M10 x 1.50
Original price was: $5.87.$1.76Current price is: $1.76.Item# ZA6149-10
AN to Metric Fitting -06 | M14 x 1.50
Original price was: $6.04.$1.81Current price is: $1.81.Item# ZA6439-10
AN to Metric Fitting -06 | M16 x 1.50
Original price was: $6.31.$1.89Current price is: $1.89.Item# ZA6739-10
AN to Metric Fitting -06 | M18 x 1.50
Original price was: $7.14.$2.14Current price is: $2.14.Item# ZA6839-10
Bulkhead Flare TEE -06
Original price was: $14.58.$4.37Current price is: $4.37.Item# ZA2634-10
Bulkhead Nuts -06
Original price was: $2.25.$0.68Current price is: $0.68.Item# ZA631-10
Bulkhead TEE On Run -06
Original price was: $11.98.$3.59Current price is: $3.59.Item# ZA2635-10
Compression Hose End -06 | 150°
Original price was: $27.82.$8.35Current price is: $8.35.Item# ZJ6150-10
Compression Hose End -06 | 180°
Original price was: $29.96.$8.99Current price is: $8.99.Item# ZJ6180-10
Female to Male AN Swivel Forged Elbow -06 | 45°
Original price was: $14.98.$4.49Current price is: $4.49.Item# ZC0645-10
Flare Reducer -06 | -04
Original price was: $5.92.$1.78Current price is: $1.78.Item# ZA64-10
Flare TEE with 1/8 Port -06
Original price was: $14.44.$4.33Current price is: $4.33.Item# ZA62418-10
Flare To Pipe Adapter with 1/8 Port -06 | 3/8 NPT
Original price was: $9.94.$2.98Current price is: $2.98.Item# ZA0688-10
Flare to Pipe On Branch TEE -06 | 1/4 NPT
Original price was: $11.44.$3.43Current price is: $3.43.Item# ZB625-10
Flare to Pipe On Run TEE -06 | 1/4 NPT
Original price was: $10.42.$3.13Current price is: $3.13.Item# ZB626-10
Got to experience some home track love today sonoma_drift had some of our local pros testing today and blessed me with the opportunity to shake down #tube40 . The car felt amazing for having coilovers setup to the spec of my old car (sprung and valved for a car that’s over 1000lbs heavier) - I’ll be sending the coilovers back to stance to have tfdave work his magic. The ron_davis_radiators coolant system worked flawlessly, the car never went over 190 degrees cylinder head temp - oil stayed 190 degrees- I’ve never had a drift car that refused to get hot, until now. I can’t say enough how pleased I am with this car ! Not a single hiccup, the radiumengineering fuel system is quiet and kept the motor fed, the tremecperformance #tkx transmission shifted awesome up at redline (7200rpm) another thing that stood out is how non-clunky the car sounds - no gear noise - no squeaking- nothing but the sound of that 416 🎶😁 - Thank you faruk.kugay for the invite- I didn’t want to drive anywhere else for the first time! Everyone involved in this project I can’t thank you all enough- robertljuba thank you for always supporting these wild ideas. The most important person I wanna thank is my wife mama.tiff.tiff - you allow me to be me and I love you for that ❤️ #drifting #tubechassis #racecar #art #fabrication #s13 #silvia #240sx #bayarea #testdrive #shopsmall 🎥 ybfavworm 📸 trent_musser
#tube40 first drive 🥳 #driftcar #tubechassis #s13 #240sx #silvia #drift #fabrication #tigweld #titanium #aluminum #stainlesssteel orionracecars av8.supercars jmsixty3
Good luck to Chad Anderson this week at Drift Indy Street League Round 1! 🛞💨💨💨
🗓️ April 19-20
📍 Kilkare Raceway - Xenia, OH
————— www.sta-bil.com —————
🛑 Start With 𝙎𝙏𝘼-𝘽𝙄𝙇 🛑
——————————————————————————
#stabilbrand #startwithSTABIL
———————————————
#driftindy #drift #drifting #driftcomp
——————————————
First startup 🏎️ #tube40 , I’m beyond stoked right now! Gotta make the carbon dash so I can mount the gauges and switches. I’m so close 🤘😬 #driftcar #racecar #s13 #240sx #silvia #art #tubechassis #carbonfiber #titanium #stainlesssteel
